Vehicle Lifts

Vehicle Lifts over £1500.00 can be purchased on lease, please contact us for details for a small monthly payment.

Tel: 024 76491973 - Email: info@garageequipmentdirect.co.uk

This is only a selection of Vehicle Lifts that are available, from the smallest 2.5 tonne car ramp up to the largest 55 tonne Commercial vehicle lift in a variety of Single post, Two post, Four post, Scissor Lifts and Mobile Vehicle Lifts. We can supply jacking beams to suit most 4 post vehicle lifts. We either stock or can obtain most other parts for nearly all lift manufacturers and can obtain lift pads for most lifts at a fraction of the cost of OEM parts. Please contact us for more information. We aim to sell only known quality lifts that are proved in service. Click here for lease purchase calculator. All our lifts are CE Approved

!

3.2 tonne 1 or 3 phase hydraulic 2 post

Style

Floorplate

Lifting Capacity

3.2 Tonne

Lifting Height

1800mm

Lifting Time

55 seconds

Overall Height

2910mm

Overall Width

3510mm

Power Supply:

1ph or 3ph

The CL3200 is our entry level two post lift. It is operated by two balanced hydraulic rams. Its special features include a lifting capacity of 3200kg. Its chain system is connected through the columns on a side unit allowing free action of the carriages. The carriages are synchronised by strong steel cables. The lift has electric safety locks. Width between the columns of 2815mm and has a minimum pad height of 95mm.

Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

Price includes delivery and installation within 60 miles of Coventry.

 

Boston 3.0 tonne 2 post lift

3 phase operation with lifting time of approx 55 secs, automatic arm locks and auto lube system

Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

Price includes delivery and installation within 60 miles of Coventry.

Tecalemit SF9010 2 post lift

Tecalemit 3.2 tonne vehicle Lift SF9010-32

Tecalemit two post vehicle lift model no.SF9010 with a capacity of 3.2 tonne. 3 phase electrics.Very low ground clearance making this lift ideal for cars with lower sills. Electro mechanical. Price includes delivery and installation within 60 miles of Coventry. £13.75/week 5 year lease for business established over 3 years, £19.80/week over 3 years. New start rates £14.55 and £20.75 respectively all + vat

Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973

DETAILED SPECIFICATIONS - CLICK HERE
Hofmann

Hoffman MTF3000 Two post lift

Now with 10 year warranty on lift nuts

Baseless 2 post vehicle lift - clearfloor model means no problem with waste oil drainers or transmission jacks, 3 phase electrics. No baseplate allows lower cars to be lifted comfortably. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions.Price includes delivery and installation within 60 miles of Coventry Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

 Detailed Information - Click here

Bend-Pak 4 tonne two post vehicle lift - Low Column

Built to last, probably the most solid ramp you could buy! Do NOT confuse this lift against cheaper imports, this is built like the proverbial brick outhouse. For the garage thats servicing vans, 4 * 4s or mainly larger cars you will be hard to beat this lift.

XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE, NOW AVAILABLE WITH DUAL WIDTHS, 3150 mm or 3480 mm


SAME AS BELOW BUT LOW COLUMN WHERE HEIGHT IS RESTRICTED

Two-post lift is a rugged 4.08 tonne capacity floor plate lift that features a Dual-Synchro equalization system and user-friendly controls, sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5" cable pulleys that are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. 

Low Profile Arms, squeeze under the lowest compact and sport vehicles. Eight piece truck and van adaptor set included. Best Of Both Worlds, Nuff said.

Supplied in 3 phase BUT CAN BE SUPPLIED 1ph electrics with 2 hp electric motor at no extra cost. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

Price includes delivery and installation within 60 miles of Coventry. Why not buy on lease, 36 months @ just over £19.78 per week for a established business-contact us for details. Detailed information - Click here

Bend-Pak 4 tonne two post vehicle lift

Built to last, probably the most solid ramp you could buy! Do NOT confuse this lift against cheaper imports, this is built like the proverbial brick outhouse. For the garage that services vans, 4 * 4s or mainly larger cars you will be hard to beat this lift.

XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE, NOW AVAILABLE WITH DUAL WIDTHS, 3150 mm or 3480 mm.
Two-post lift is a rugged 4.08 tonne capacity floor plate lift that features a Dual-Synchro equalization system and user-friendly controls, sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5" cable pulleys that are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. 

Low Profile Arms, squeeze under the lowest compact and sport vehicles. Eight piece truck and van adaptor set included. Best Of Both Worlds, Nuff said.

Supplied in 3 phase BUT CAN BE SUPPLIED 1ph electrics with 2 hp electric motor at no extra cost. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

Price includes delivery and installation within 60 miles of Coventry. Why not buy on lease, 36 months @ just over £20.31 per week for a established business-contact us for details.

Detailed information - Click here

Bend-Pak 4500kg baseless vehicle lift

NOW AVAILABLE AS DUAL WIDTH

Lifting height 1854mm, Overhall height 3683mm, Overhall width 3353mm, Width between posts 2791mm, Drive thru clearance 2362mm, Min pad height 102mm.

Price includes delivery and installation within 60 miles of Coventry

4.5 tonne electro hydraulic baseless two post vehicle lift, Dual hydraulic cylinders, simple operation, automatic arm locks. Comes with set of spacer lift pads ideal for vans. Supplied in 1 phase electrics. High version  Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

DETAILED SPECIFICATIONS - CLICK HERE
tec 9206

Tecalemit 4 tonne 2 post vehicle lift

  • Low lifting pad height 100mm
  • Rapid lifting time 60 secs
  • Asymmetric arms for longer wheelbase vehicles
  • Electrically operated mechanical latching system
  • Single phase £135.00 extra

    • The SF 9206 lift is mounted on a heavy duty steel base-frame, providing additional rigidity and security to the lift structure.The lift has a wide clearance between the lifting carriages allowing clear access for a wide range of cars and LGV's. The minimum pad height of 100mm is compatible with the majority of cars and LGV's.

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry.

    Detailed Specifications - click here

    Challenger Q4 - 4 tonne 2 post

    Genuine all American heavy duty 2 post vehicle lift from Challanger lifts, ideal for cars and light commercials.

    Click here for more information

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions.

    Contact:info@garageequipmentdirect.co.uk or phone (024) 76491973 Price includes delivery and installation within 60 miles Coventry.

    * Adjustible Overhead For Max Clearance or Protection Against Lower Obstructions.
    * Width Overall: 131 3/4"
    * Drive Thru Clearance: 98 3/8"
    * Padded Overhead Safety Switch
    * Floor to Overhead Limit Switch: 11' 8 1/2" (3568mm) or 10' 10 1/2" (3493mm)
    * 3-Stage Front Arm and 2-Stage Rear Arms.
    * Front Arm Reach: 21 3/4" - 39 1/4"
    * Rear Arm Reach: 38 1/4" - 55 3/8"
    * Double Telescoping Screw Pads. Screw Pad Height: 4" (103mm)- 7 1/2" (193mm)
    *  Optional Drop In Truck Adapters
    * * Inside Columns: 110 1/4" (2800mm)
    * Steel Cables for Longer Life
    * Single Point Lock Release
    * Rubber Door Protector
    * Voltage Single Phase: 230v, 20 amp breaker
    * Ceiling Height Required: 12' 5" (3785mm)

    14 ft version available for only £245.00 extra

    Bend- Pak 5.4 tonne two post vehicle lift

    LWB Version available with 1800mm arms for £260.00 supplement, standard arms 1500mm
    XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE This open-top two-post lift is a rugged 5.4 tonne capacity floor plate lift that features a “Dual-Synchro” equalization system and user-friendly controls. These advanced, state-of-the-art models feature dual, direct-drive low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system, an exclusive BendPak design feature saving you maintenance costs throughout the life of the lift. Sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 6” cable sheaves are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. Supplied with set of 8 spacers - see more images
    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973. Price includes delivery and installation within 60 miles of Coventry DETAILED SPECIFICATIONS - CLICK HERE

    Boston 4 tonne Four post lift

    Four tonne Class 4 MoT vehicle lift. It has a platform length of 4.3m and can be surface or recess mounted depending on customer requirements or bay layouts.

    Specifications

    • Hydraulic operation. Hydraulics and motor on inside edge of column for max working space
    • Long drive-up ramps
    • Recessed radius turning plates
    • Recesses with cover plates behind tuning plates fitted as standard for future fitting of Play Detectors
    • Auto locking system on each post
    • Safety switches and lock release solenoids mounted internal of the crossbeam to avoid potential damage
    • Cross beam pulley covers
    • Lifting height of 1.96m
    • Fully approved for Class 4
    • Air outlet fitted between platforms for easy connection of air jacking beams
    • Inspection lamp fitted to control panel
    hofeuropa

    Hofmann 3.5 tonne 4 post vehicle lift

    Four post vehicle lift with a capacity of 3.5 tonne. 3 phase electrics and includes installation.Electro hydraulic with a 4.3 metre platform length. Surface or recessed. Price includes delivery and installation within 60 miles of Coventry Buy on lease from only £26.94 per week

     

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Jacking beam extra. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

     

    BendPak 4.0 tonne Four post lift

    Four post vehicle lift with a capacity of 4.0 tonne. 3 phase or can be supplied 1 phase electrics. Electro hydraulicl. Due to the nature of lift installations, contact is required before purchase to discuss floor, air and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry 
  • Lifting capacity*: 9,000 lbs. / 4,082 kg
  • Overall width: 116-3/4" / 2,041 mm
  • Outside length: 174" / 4,420 mm
  • Overall length: 200" / 5,080 mm 
  • Runway min height: 4-1/2" / 114 mm
  • Max rise: 70" / 1,778 mm
  • Max lifting height: 74-1/2" / 1,892 mm
  • Width between posts: 106-3/4" / 2,711 mm
  • Runway width: 19" / 483 mm
  • Width between runways: 37-1/4" – 44" / 946 mm – 1,118 mm
  • Length of runways: 164" / 4,166 mm
  • Lifting time: 45 sec

    • Boston 6 tonne 4 post Lift

    6 Tonne Class 7 MoT vehicle lift. It has a platform length of 5.2m or 6.0m and can be surface or recess mounted depending on customer requirements or bay layouts. Can be supplied with dual play detectors for Class 7 ATL.

    Specifications

    • Hydraulic operation. Hydraulics and motor on inside edge of column for max working space
    • Long drive-up ramps
    • Recessed radius turning plates
    • Recesses with cover plates behind tuning plates fitted as standard for future fitting of Play Detectors
    • Auto locking system on each post
    • Safety switches and lock release solenoids mounted internal of the crossbeam to avoid potential damage
    • Cross beam pulley covers
    • Lifting height of 1.96m
    • Fully approved for Class 7
    • Air outlet fitted between platforms for easy connection of air jacking beams
    • Inspection lamp 

    Shown with optional ATL play detector

    Bend-Pak 6.3 tonne Four post vehicle lift

    Four post vehicle lift with a capacity of 6.35 tonne (14,000lbs). 3 phase or can be supplied 1 phase electrics and includes installation. Electro hydraulic with a 5.029 metre platform. Due to the nature of lift installations, contact is required before purchase to discuss floor, air and electrical conditions.

    Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry 

    Built to last, Electric hydraulic operation.

  • Lifting capacity*: 14,000 lbs. / 6,350 kg
  • Overall width: 126"  (3200 mm)
  • Outside length: 205"  (5207 mm)
  • Overall length: 235"  (5969 mm)
  • Height of columns: 88"  (2235 mm)
  • Runway min height: 7-1/2"  (190 mm)
  • Max rise: 70"  (1778 mm)
  • Max lifting height: 77-1/2"  (1968 mm)
  • Width between posts: 116"  (2946 mm)
  • Runway width: 20"  (508 mm)
  • Width between runways: 37" - 49" (940 mm – 1245 mm)
  • Length of runways: 198"  (5,029 mm)
  • Lock spacing: every 4" (102 mm)
  • Lifting time: 60 sec
    1. Non skid surface
    2. Platforms adjust for different vehicle widths
    3. Heavy duty 1/2" stainless steel aircraft cable
    Can be supplied with long platforms to suit max wheelbase of 5994mm at + £545.00

    DETAILED SPECIFICATIONS - CLICK HERE

    • Hofmann Europa 6 tonne lift

    Four post vehicle lift with a capacity of 6 tonne. 3 phase electrics and includes installation. Electro mechanical. Greater capacity allows for the heavier vehicles with a 5.8 metre platform length. Price includes delivery and installation within 60 miles of Coventry
    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

    Bend Pak 2.7 tonne Low Rise Vehicle Lift

    Overhall width 1778mm, Overhall length 2083mm and a lifting height of 660mm

    With a capacity of 2721 kg this low rise lift is ideal for the tyre bay or where space is at a premium. Electro hydraulic working off a 1ph supply and is a portable model. Comes with 4 large hard rubber lift blocks

    Bend Pak 2.7 tonne Mid Rise Portable Lift

    Overhall width 1016mm, Overhall length 2057mm and a lifting height of depending on adaptors used of a max of 1219mm  to 1346mm

    With a capacity of 2721 kg this low rise lift is ideal for the tyre bay or where space is at a premium. Electro hydraulic working off a 1ph supply. Portable model which can easily be moved from bay to bay.Narrow bay with short arms almost like a 2 post lift. Comes complete with a 12 piece adaptor kit inclded free of charge.

    Texo Scissor lift 4 tonne

    4 tonne 4 metre platform length, lift height 1950mm with a height of only 140mm when lowered. Lift can be surface mounted or recessed.

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry.

    c419816791200f458cce0169aed209aa

    Texo Platform scissor lift

    3.5 tonne version only £125.00 extra

    3000 Kg capacity hydraulic scissor lift, Platform length 1530mm but with extendable platform which can go to 2100mm. Recess in floor making this lift ideal where space is at a premium when in the lowered position it is flush with floor with no post or platforms to cause any obstruction. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

     Price includes delivery and installation within 60 miles of Coventry but NOT any civil building work or mains electrics

    c419816791200f458cce0169aed209aa

    Texo 3.5 tonne Platform scissor lift

    Surface mounted but can be recessed, BONUS - no air required for this lift.

    3500 Kg capacity hydraulic scissor lift, Platform length 1530mm but with extendable platform which can go to 2100mm. Recess in floor making this lift ideal where space is at a premium when in the lowered position it is flush with floor with no post or platforms to cause any obstruction. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

     Price includes delivery and installation within 60 miles of Coventry but NOT any civil building work or mains electrics

    Bendpak 6.8 tonne 2 post

    Lifting Capacity 15,000lbs / 6804kg
    Max Lifting Height (pad only) 74"/1880mm
    Lifting Time 45 seconds
    Overall Height 170"/4138mm
    Overall Width 155"/3937mm
    Power Supply Single or 3 Phase
  • 15,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • 8-piece truck and van adapter set comes standard
  • Convenient storage is included for truck and van adapters
  • Versatile drop-in contact pads with stackable adapters.

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973. Price includes delivery and installation within 60 miles of Coventry.


    • bendpakhd18

    Commercial 8 tonne 4 post lift

     

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973

  • Electric/hydraulic power system
  • Heavy-duty lifting cable system
  • Self-lubricating bearings
  • Multi-position safety locks in each column
  • Push-button safety release
  • Optional drive-thru ramps available
  • Adjustable runways
  • 3 phase electrics
    • HD-18
    Lifting Capacity* 18,000 lbs. / 8165 Kg.
    Overall Width 154" / 3912 mm.
    Outside Length 201" / 5105 mm.
    Overall Length 241" / 6121 mm.
    Height of Columns 93” / 2362 mm.
    Min. Runway Height 8-1/2” / 216 mm.
    Max. Rise 60” / 1524 mm.
    Max. Lifting Height 68-1/2” / 1740 mm.
    Width Between Columns 134" / 3404 mm.
    Runway Width 22" / 559 mm.
    Width Between Runways (*) 38" - 56" / 965 mm. – 1422 mm.
    Length of Runways 203" / 5156 mm.
    Locking Positions 9
    Lock Spacing Every 6" / 152 mm.
    Lifting Time

    75 Seconds

    mse5000

    Hofmann 5 tonne baseless 2 post lift

    5.0 tonne two-post lift with overhead gantry

    •  Electro-mechanical operation
    • Carriage synchronisation via cable in gantry
    • Extra long arms as standard
    • Nylatron lifting nuts with automatic lubrication
    • Rugged rolled steel lifting columns
    • Maintenance free carriage rollers
    • Automatic arm locking

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry 

    Cascos 12 tonne vehicle lift

    Cascos 12 tonne 4 post vehicle lift, lifting time 80 seconds. 180mm concrete requirement

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry 

    Bendpak 8.1 tonne 2 post

    Lifting Capacity 18,000lbs / 8165kg
    Lifting Height 74"/1880mm
    Lifting Time 45 seconds
    Overall Height 170"/4318mm
    Overall Width 155"/3937mm
    Power Supply Single or 3 Phase
  • 18,000-lb. lifting capacity
  • Padded overhead safety shutoff bar
  • Extended height top-beam provides greater overhead clearance
  • Single-point safety release
  • Dual direct-drive hydraulic cylinders
  • Dual-synchro equalization system for equal lifting
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Oversized A36 steel base plates
  • Self-lubricating dura-glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • Durable, rubber lift pads with stackable adapters
  • 8-piece truck and van adapter set comes standard
  • Convenient storage is included for truck and van adapters
  • Versatile drop-in contact pads with stackable adapters

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry

    • Challenger 5 tonne 4 post - 1 phase

  • Lifting Capacity 11,023 Lbs. / 5000 kg.
  • Rise Height 78 inches / 1981 mm
  • Overall Length 20' 4.5 inches / 6210 mm
  • Overall Width 10' 3.75 inches / 3321 mm
  • Inside Columns 116 inches / 2946 mm
  • Between Columns 196 inches / 4978mm
  • Height of Columns 90.5 inches / 2299 mm
  • Width of Runways 20 inches / 508 mm
  • Height of Runways 7 inches / 178 mm
  • Minimum Width Between Runways 40 inches/1016 mm
  • Maximum Width Between Runways 43 inches/1092 mm
  • Air Supply Required 85 - 120 psi
  • Motor 2.2 kw,Voltage Single Phase: 50 HZ - 230v
  • Speed of rise 70 seconds

    Due to the nature of lift installations contact is required first, price includes delivery and installation within 60 miles of Coventry