Laycock & Kismet Lift spares

Selection of spares to suit Laycock and kismet lifts.

Tel: 024 76491973  - Fax: 024 76749655   - Email: info@garageequipmentdirect.co.uk

!
armlock

Kismet Arm lock kit

Arm lock and toe guard kit to suit Laycock 1700 and Kismet 1700 two post vehicle lifts - 4 required per ramp.

Meets all new legislation.

Laycock 4" circular bolt on lift pad

Lift pad for most of the older Laycock two post lifts, this pad fits onto support plate by means of 2 bolts.
hscont

Laycock / Tecalemit High Speed lift contactor

Contactor for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase

Laycock/Tecalemit High Speed Overload

Overload for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase fits into item above.
hssealkit

Laycock / Tecalemit High speed lift seal kit

High Speed Lift - for model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,
switchhs

Laycock / Tecalemit High speed control switch

Power post micro switch located on top of lift control valve. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
springhssaf

Laycock / Tecalemit Safety arm spring for High Speed lift

Safety Arm spring for Laycock/Tecalemit High speed lift  (2 1/4" length).  Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
cablesbrad

Lift cables to suit Laycok or Kismet lifts

Lift cables to suit various models, if you have doubts please check on your existing cables, on thread which protrudes thru top of post there should be a flat with the code letters stamped on. Any doubts please phone 1st. There are many other models available so if yours is NOT listed - give us a ring.

High Speed Lift Standard Length cables are for model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

 

For more cables click here to visit our spares site

hsrelief

Laycock / Tecalemit Relief Valve

Laycock / Tecalemit High Speed Vehicle Lift relief valve. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Available as New or Service Exchange. Please note a supplement of £100.00 is charged on a Service Exchange unit. This will be refuded on return of your exchange valve.

Laycock / Tecalemit Safety arm cable roller

Safety arm roller for Laycock or Tecalemit high speed vehicle lift, fitted where cable runs up inside post after passing around the pulley and anchoring at top of post. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982 (Price is each)
feedpipe

Laycock / Tecalemit Main Ram feed hose

Ram feed hose for Laycock/Tecalemit High Speed lift comes from Control box on power post down to front of platform. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
rollerhs

Laycock / Tecalemit Ram guide roller

Ram end plate guide roller (21mm wide by 21mm length). Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
rollerposths

Laycock / Tecalemit Post guide roller

Post guide roller for Laycock/Tecalemit High Speed lift (Fits onto stabalizer bracket) shown on bracket - not included. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
hssingle

Pulley to suit Laycock - Tecalemit High speed lift

Post pulley or single track horizontal cast pulleys to suit Laycock high speed or Tecalemit 151111 four post vehicle lift.

Pin is listed below 3" for horizontal post pulleys and 5" for vertical platform pulleys

Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

pulleydouble

Pulley to suit Laycock - Tecalemit High speed lift

Horizontal double track cast pulleys to suit Laycock high speed or Tecalemit 151111 four post vehicle lift.

Pin is listed below, 5" is required

Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

hspinshort

Pulley pin to suit above pulley

These are only fitted on the corner post vertical pulleys and are approx 3" length.
hspin

Pulley pin to suit above pulleys

These are fitted to the platform pulleys, which sit horizontal and are approx 5" length
hsspacer

Laycock / Tecalemit Pulley Spacer

Spacer for pulleys on all High speed vehicle lifts, these are fitted on main posts and also on horizontal platform pulleys.
hscontroltop

Laycock / Tecalemit control valve (top)

High Speed lift top section of control valve, no need to purchase complete valve if cam assembly breaks. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,
hscontrolvalve

Laycock / Tecalemit control valve

Control valve to suit Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

pad1700

Lift pad to suit Laycock vehicle lifts

Kismet / Laycock KEL1700 lift pad (6" * 31/4" rectangle)
Rubber lift pad made with oil resisitant material to provide better wear tear

Laycock / Tecalemit Main screw for 8 ton and 14 ton lifts

Main screw for Laycock / Tecalemit 8 tonne or 14 tonne four or six post commercial vehicle lifts
opnut

Laycock / Tecalemit Operating nut for 8 ton and 14 ton lifts

Op nut to suit Laycock - Tecalemit 8 ton or 14 ton commercial four and six post vehicle lifts
8tonsafswit

Laycock / Tecalemit Safety switch

Safety micro switch for Laycock/Tecalemit 8 and 14 ton vehicle lifts.
coverplate

Cover Plate to suit Laycock / Tecalemit lifts

Motor housing chain bottom coverplate for Laycock 8 ton and 14 ton vehicle lifts. Front and rear shown on picture.
collets

Collets for 8 and 14 ton Laycock / Tecalemit lifts

Collets to suit Laycock 8 and 14 tonne commercial vehicle lifts, supplies as a pair
coroopnut

Operating nut to suit Coronation vehicle lifts

Op nuts to suit Laycock Coronation, Coro 1 and Coro 2 Vehicle lifts. Coro 2 op nut is flat bottomed with no boss protruding through the trip plate, also identified that under the electric motor there is a drive belt running from motor to large 12 inch dia cog rather than the chain running directly around sprocket on the motor. Please select.

Picture shows op nut to suit Coronation and Coro 1

hssafvalve

Laycock / Tecalemit Safety valve

For all Laycock / Tecalemit High Speed vehicle lifts, situated on main ram on underside of platforms. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Radius plates Heavy Duty

Select correct lift profile by clicking "icon, under main picture"
Heavy duty radius plates suitable for Class 4 or 7 MOT

Heavy duty radius plates with ballrace

Select correct lift profile by clicking "icon, under main picture"
Heavy duty radius plates suitable for Class 4 or 7 MOT with nylon ballrace, Now cadmium plated and gritted slip plate.

SWL Sticker

Vertical SWL sticker, just peel the numbers to use for almost any lift