Tecalemit Lift spares

Spares for Tecalmit vehicle lifts, also listed here are some brake tester spares

Tel: 024 76491973  - Fax: 024 76749655   - Email: info@garageequipmentdirect.co.uk

!
sf8768armlock

Tecalemit Arm lock Rod

Arm lock rod (Long arm) to suit Tecalemit SF8768. Fits on side of arm and locks arm in position
sf8768shortlock

Tecalemit Arm lock Rod

Arm lock rod (Short arm) to suit Tecalemit SF8768. Fits on side of arm and locks arm in position.
chainguide

Tecalemit Chain guide

Chain guide to suit Tecalemit Twintec Mk 5 (SF8768)
chain

Drive chain

Drive chain to suit Tecalemit Mk 3 Mk 4 or Mk 5 vehicle lifts. Also suits Hoffman Europa, Werther 301 and 255, Bradbury 2103 vehicle lifts. Comes in a 25' box 1/2" pitch
hssealkit

Laycock / Tecalemit High speed lift seal kit

High Speed Lift - for model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,
cablesbrad

Lift cables

Lift cables to suit various models, if you have doubts please check on your existing cables, on thread which protrudes thru top of post there should be a flat with the code letters stamped on. Any doubts please phone 1st. There are many other models available so if yours is NOT listed - give us a ring.
H/Speed Standard Length cables are for model Nos 151112, 151111, 122478, 123795, 123795, 121464, 123794, 150981, 150982,

For more cables click here to visit our spares site

Lift pad for Tecalemit Model SF8768

Tecalemit Model SF8768  complete with threaded insert. As origional type fitted to this lift but with a larger 6" dia pad for greater stability.

777

Lift pad to suit Tecalemit SF8768

As a cheaper alternative to the Tecalemit SF8768 why not use a hookover 4" pad - just grind off expensive original and hook over existing plate.
pad1700

Lift pads to suit Tecalemit 2 post vehicle lifts

Tecalemit 200020 lift pad (6" * 31/4" rectangle)
Rubber lift pad made with oil resisitant material to provide better wear & tear
feedpipe

Laycock / Tecalemit Main Ram feed hose

Ram feed hose for Laycock/Tecalemit High Speed lift comes from Control box on power post down to front of platform. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
feedpipe

Tecalemit SF8757 Main ram feed hose

Main ram feed hose for Tecalemit SF8757 or SF8758 Runs from control box into front of platform along ram and connects to ram in centre of platform.
tecsf8768opnut

Operating nuts to suit Tecalemit SF8768

Operating nuts to suit Tecalemit two post lift Model No SF8768 manufactured in brass. IMPORTANT that you provide serial number in the space provided as there are two types of nut.  TWO NUTS PER LIFT REQUIRED.
rollerposths

Laycock / Tecalemit Post guide roller

Post guide roller for Laycock/Tecalemit High Speed lift (Fits onto stabalizer bracket) shown on bracket - not included. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
hssingle

Pulley to suit Laycock - Tecalemit High speed lift

Post pulley or single track horizontal cast pulleys to suit Laycock high speed or Tecalemit 151111 four post vehicle lift.

Pin is listed below 3" for horizontal post pulleys and 5" for vertical platform pulleys

Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

pulleydouble

Pulley to suit Laycock - Tecalemit High speed lift

Horizontal double track cast pulleys to suit Laycock high speed or Tecalemit 151111 four post vehicle lift.

Pin is listed below, 5" is required

Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

hspinshort

Pulley pin to suit above pulley

These are only fitted on the corner post vertical pulleys and are approx 3" length.
hspin

Pulley pin to suit above pulleys

These are fitted to the platform pulleys, which sit horizontal and are approx 5" length
hsspacer

Laycock / Tecalemit Pulley Spacer

Spacer for pulleys on all High speed vehicle lifts, these are fitted on main posts and also on horizontal platform pulleys.
rollerhs

Laycock / Tecalemit Ram guide roller

Ram end plate guide roller (21mm wide by 21mm length). Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit Safety arm cable roller

Safety arm roller for Laycock or Tecalemit high speed vehicle lift, fitted where cable runs up inside post after passing around the pulley and anchoring at top of post. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982 (Price is each)
switchhs

Laycock / Tecalemit High speed control switch

Power post micro switch located on top of lift control valve. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
hscontroltop

Laycock / Tecalemit control valve (top)

High Speed lift top section of control valve, no need to purchase complete valve if cam assembly breaks. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,
hscontrolvalve

Laycock / Tecalemit control valve

Control valve to suit Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

springhssaf

Laycock / Tecalemit Safety arm spring for High Speed lift

Safety Arm spring for Laycock/Tecalemit High speed lift  (2 1/4" length).  Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
tecmk5safcab

Tecalemit Safety cable Mk 5 Twin tec SF8768

Safety cable to suit Tecalemit twintec Mk5 SF8768 supplied with FREE nylon guide tubes and clips for base of posts
opnut

Laycock / Tecalemit Operating nut for 8 ton and 14 ton lifts

Op nut to suit Laycock - Tecalemit 8 ton or 14 ton commercial four and six post vehicle lifts

Laycock / Tecalemit Main screw for 8 ton and 14 ton lifts

Main screw for Laycock / Tecalemit 8 tonne or 14 tonne four or six post commercial vehicle lifts
8tonsafswit

Laycock / Tecalemit Safety switch

Safety micro switch for Laycock/Tecalemit 8 and 14 ton vehicle lifts.
hssafvalve

Laycock / Tecalemit Safety valve

For all Laycock / Tecalemit High Speed vehicle lifts, situated on main ram on underside of platforms. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
hsrelief

Laycock / Tecalemit Relief Valve

Laycock / Tecalemit High Speed Vehicle Lift relief valve. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Available as New or Service Exchange. Please note a supplement of £100.00 is charged on a Service Exchange unit. This will be refuded on return of your exchange valve.

hscont

Laycock / Tecalemit High Speed lift contactor

Contactor for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase

Laycock/Tecalemit High Speed Overload

Overload for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase fits into item above.
teccartridge

Tecalemit lowering valve cartridge

Lowering valve Cartridge to suit Tecalemit SF8757, SF8758, SF8761, SF8762. If you have oil leak from lowering valve, usually leaking from cartridge.
tecbutton

Tecalemit Push button

Push button for Tecalemit Twintec Mk 5 (SF8768) will also suit Mk3 & 4  two post lifts - To operate the Up or Down control of the lift. You will only see the push button part on front of the lift control box.
tec6switch

Tecalemit Mk 6 control switch

Control switch for Tecalemit Twintec Mk 6 two post lift - Up and Down control. Actually operates lift, you will only see switch part on front of the lift.

Tec Mk 5 - SF8768 Contactor

Contactor for Tecalemit Twintec Mk 5, SF8768 two post car lift, comes with auxilliary contact that mounts on the front
tecclutch

Tecalemit Safety arm actuator and roller

Actuator for Tecalemit four post vehicle lifts, comes with roller and suits Mk 4 and Mk 5 spacemaster lifts.
btswitch

Tecalmit Brake Tester Switches

Hand control switches for Tecalemit DE7184 Brake Tester - 1 red and 1 white supplied.
btcable

Tecalmit Brake Tester Cable

Hand control cable for Tecalemit DE7184 Brake Tester. (Price per metre)
tecdipper

Tecalemit oil dipper

Oil dipper for Tecalemit 2 post lifts including Mod SF8768, twintec Mk 5 and 6

Radius plates Heavy Duty

Select correct lift profile by clicking "icon, under main picture"
Heavy duty radius plates suitable for Class 4 or 7 MOT

Heavy duty radius plates with ballrace

Select correct lift profile by clicking "icon, under main picture"
Heavy duty radius plates suitable for Class 4 or 7 MOT with nylon ballrace, Now cadmium plated and gritted slip plate.
uniarm

Universal Arm Lock Kit

Comply with new 2007 legislation, Universal arm lock kit for two post car lifts - Brackets can be welded or bolted to lift. Supplies as a set of 4. Rod length 490mm and fitting length of both other brackets approx 120mm * 25mm

SWL Sticker

Vertical SWL sticker, just peel the numbers to use for almost any lift

Tecalemit 20020 Arm lock kit

Arm lock and toe guard kit to suit Tecalemit 20020 two post vehicle lifts - 4 required per ramp.

Meets all new legislation.