Tecalemit 3.2 tonne vehicle Lift SF9010-32

Tecalemit SF9010 2 post lift
  • Description
Tecalemit two post vehicle lift model no.SF9010-32 with a capacity of 3.2 tonne. 3 phase electrics.Very low ground clearance making this lift ideal for cars with lower sills. Electro mechanical. Price includes delivery and installation within 60 miles of Coventry. £13.43/week 5 year lease for business established over 3 years, £19.72 /week over 3 years. New start rates £14.29 and £20.31 respectively. All + vat

Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973

DETAILED SPECIFICATIONS - CLICK HERE

Hoffman MTF3000 Two post lift

  • Description

Now with 10 year warranty on lift nuts

Baseless 2 post vehicle lift - clearfloor model means no problem with waste oil drainers or transmission jacks, 3 phase electrics. No baseplate allows lower cars to be lifted comfortably. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions.Price includes delivery and installation within 60 miles of Coventry Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

 Detailed Information - Click here

Bend-Pak 4 tonne two post vehicle lift - Low Column

  • Description
Built to last, probably the most solid ramp you could buy! Do NOT confuse this lift against cheaper imports, this is built like the proverbial brick outhouse. For the garage servicing vans, 4 * 4s or mainly larger cars you will be hard to beat this lift.

XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE, NOW AVAILABLE WITH DUAL WIDTHS, 3150 mm or 3480 mm. Two-post lift is a rugged 4.08 tonne capacity floor plate lift that features a Dual-Synchro equalization system and user-friendly controls, sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5" cable pulleys that are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. 

Low Profile Arms, squeeze under the lowest compact and sport vehicles. Eight piece truck and van adaptor set included. Best Of Both Worlds, Nuff said.

Supplied in 3 phase BUT CAN BE SUPPLIED 1ph electrics with 2 hp electric motor at no extra cost. Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

Price includes delivery and installation within 60 miles of Coventry. Why not buy on lease, 36 months @ just over £19.78 per week for a established business-contact us for details. Detailed information - Click here

Bend-Pak 4500kg baseless vehicle lift

  • Description

Lifting height 1854mm, Overhall height 3683mm, Overhall width 3353mm, Width between posts 2791mm, Drive thru clearance 2362mm, Min pad height 102mm.

Price includes delivery and installation within 60 miles of Coventry

4.5 tonne electro hydraulic baseless two post vehicle lift, Dual hydraulic cylinders, simple operation, automatic arm locks. Comes with set of spacer lift pads ideal for vans. Supplied in 1 phase electrics. 14ft High version available for supplement of £345.00  Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

DETAILED SPECIFICATIONS - CLICK HERE

Dunlop 4 tonne 2 post

dl240
  • Description

Hydraulic 4.0 Tonne Lift.

Control box operates all functions
Automatic arm locks
Screw adjustable lifting pads
3 part front and 2 part rear extensions.
CE Approved
Internal Width - 2760mm
External Width - 3484mm
3 phase or 1 phase option.

Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Price includes delivery and installation within 60 miles of Coventry.

Detailed information - click here

Dunlop 4 tonne baseless

dunlop-dl240b-260x260
  • Description

The Dunlop DL240B is a baseless lift with on overhead gantry and is suitable for lifting vehicles of up to 4 tonnes in capacity.

This lift is electro-hydraulic and is available in single or three phase at no extra cost.

Height from the floor to the top of the gantry is 3600mm and extensions are available, raising this to 4600mm. (supplement)

Click here for further info

Tecalemit 4 tonne 2 post vehicle lift

tec 9206
  • Description
  • Low lifting pad height 100mm
  • Rapid lifting time 60 secs
  • Asymmetric arms for longer wheelbase vehicles
  • Electrically operated mechanical latching system
  • Single phase £135.00 extra
  • The SF 9207 lift is mounted on a heavy duty steel base-frame, providing additional rigidity and security to the lift structure.The lift has a wide clearance between the lifting carriages allowing clear access for a wide range of cars and LGV's. The minimum pad height of 100mm is compatible with the majority of cars and LGV's.

    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk. or phone (024) 76491973 Price includes delivery and installation within 60 miles of Coventry.

    Detailed Specifications - click here

    Bend- Pak 5.4 tonne two post vehicle lift

    • Description
    LWB Version available with 1800 mm arms for £245.00 supplement, standard arms are 1500 mm
    XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE This open-top two-post lift is a rugged 5.4 tonne capacity floor plate lift that features a “Dual-Synchro” equalization system and user-friendly controls. These advanced, state-of-the-art models feature dual, direct-drive low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system, an exclusive BendPak design feature saving you maintenance costs throughout the life of the lift. Sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 6” cable sheaves are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. Supplied with set of 8 spacers - see more images
    Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973. Price includes delivery and installation within 60 miles of Coventry DETAILED SPECIFICATIONS - CLICK HERE

    Hofmann MSE5000

    mse5000
    • Description

    Now with 10 year warranty on lift nuts

  • Rated load capacity 5000 kg
  • Lifting height 2040 mm
  • Overall width 3660 mm
  • Power supply 3ph
  • Pick-up pad min 120mm
    1. Without base frame, perfect ground clearance
    2. Symmetrical design
    3. Automatic arm locks
    4. Electro-mechanical drive via two synchronised motors
    5.  Due to the nature of lift installations, contact is required before purchase to discuss floor and electrical conditions. Contact: info@garageequipmentdirect.co.uk or phone (024) 76491973

      Price includes delivery and installation within 60 miles of Coventry. Why not buy on lease, 36 months @ just over £45.50 per week for a established business-contact us for details.

       

      Detailed information - Click here