Tyre Equipment

We have a large choice of wheel balancers and tyre machines available at competitive prices. All are available on single phase electrical supply and can easily be installed, basically unpack, fit a plug and you are up and running. All these machines should easily pay for themselves in a relatively short space of time. Please view specifications below and feel free to contact us to discuss any requirements that you might have.

Tel: 024 76491973  - Fax: 024 76749655   - Email: info@garageequipmentdirect.co.uk

!
tyreinflator

Tyre Inflater

 PCL Mk 3 twin hold on, tyre inflater with calibration certificate. 

Supertracker Wheel aligner

Laser standard equipment
2 x Measuring Heads
1 x Pair Wheel Hangers 12" to 18"
1 x Pair Wheel Hangers 14" to 24"
2 x Rear Scales
1 x Steering Wheel Lock
1 x Pair Turn Plate Bases
1 x Pair Dished Turn Plates
1 x Auto Data Book
1 x Instruction Book
1 x Wall mounted storage unit c/w charging system
1 Years Warranty

Shown with optional illuminated display board

No cables on the heads

No cables to become entangled. No plugs and sockets to become damaged, and no restrictions caused by cables.

As driven’ readings

The wheel hanger allows accurate ‘As driven on the road’ readings of all measurements - so vital on modern vehicles.

Run out compensation if required.

The ability to perform run out on damaged wheels.

Perfect wheel rim contact

No damage to aluminium or painted steel wheels.

Toe scales can be read from above and below the heads

Toe readings are easily seen from above if the vehicle is on the floor, or below if the vehicle is on the ramp.

Automatic recharge of batteries

Batteries recharge when heads are returned to the
charging unit, always ready for use.

Fits 12” to 24” wheels.

This allows complete flexible across the whole
range of modern wheels.

Supertracker 4 wheel aligner

The new STR200 wheel alignment system 
incorporates a 17” Monitor, Keyboard, Mouse, 
and Printer, to give a customer print out if required. 
Measuring heads with built in electronics, 
displaying live toe and camber readings. 
The state of the art electronics allow Caster measurement to be calculated with out the need for 
graduated turn plates. High tech Zigbee radio transmitting technology is used to communicate 
between the laser measuring heads and the pc.
Features
 
1. No cables on the heads
No cables to become entangled. No plugs and sockets to
become damaged, and no restrictions caused by cables.
2. Positive gravity wheel hangers Quick and simple fixing to the wheel.
3. ‘As driven’ readings
The wheel hanger allows accurate ‘As driven on the
road’ readings of all measurements - so vital on modern
vehicles.

4. Wheel hangers & measuring heads factory calibrated as a unit.

 Eliminates the need to jack each wheel and compensate for clamp run out, saves 60%
of set up time.
5. Run out compensation if required. The ability to perform run out on damaged wheels.
6. Measuring heads contain no moving parts Low ‘On costs’ and greater reliability.
7. Perfect wheel rim contact No damage to aluminium or painted steel wheels.
8. Toe scales can be read from above and below the heads Toe readings are easily seen from above if the vehicle is on the floor, or below if the vehicle is on the ramp.
9. Automatic recharge of batteries Batteries recharge when heads are returned to the
charging unit, always ready for use.
10. Unrestricted use around the
... working area		 Measure alignment wherever you like - not
restricted to one site.
11. Fits 12” to 24” wheels. This allows complete flexible across the whole
range of modern wheels.
12. Print out Shows before and after alignment readings. Customer
and company can have a record for future reference of
work carried out
13. Live readings

This Speeds up the alignment procedure. Plus allows
greater accuracy as alignment readings are easily seen during the alignment process.

 

Please click for more information

 

Semi Auto Tyre changer

Semi Automatic swing arm tyre changer 24" turntable, 10"-24" rim clamping, 1 phase

Download further information

Motorised Wheel Balancer

Auto data of offset and rim diameter, 1 phase 240v) operation, behind spoke hidden weight program, 8" - 23" rim diameter, 7 mode ALU balance, Auto start on lowering hood.

Download further information

Click to view instruction manual

Hofmann Special Offer Twin Pack

MASSIVE TWIN PACK SAVING

Features on the Hofmann geodyna® FUSION wheel balancer include patented Virtual Plane Measurement for highly accurate balancing results, regardless of ambient conditions, the automated input of wheel rim to machine distance and an easy ALU mode for the automatic pre-selection of balance weight locations. A geodata™ gauge arm ensures quick and precise balance weight placement. geodyna® FUSION can be purchased separately for £1,699.

The monty® FUSION tyre changer is equally well specified, featuring a 26” clamping range through the use of Plus 6 adapters that are supplied as standard, as is an easymont® pro helper arm that ensures the safe and gentle mounting and demounting of low profile and run-flat tyres. A plastic demount head for alloy rims and quick-change head system is also included. monty® FUSION can be purchased separately for £2,899.

hoff800

Hofmann Geodyna 800 - Digital Wheel Balancer

The perfect entry-level wheel balancer for shops desiring to expand into wheel service and looking for value without compromising balancing features

Buy from only £7.27 per week on a 5 year lease

  • Conspicuous LED display integrated in weight tray
  • Manual data input
  • Static and dynamic unbalance measurement in a single measuring run
  • RPI technology (Real Plane Imaging)
  • 6 balancing modes, 5 of which for alloy wheels
  • Spoke mode with hidden weight function
  • Optimisation mode
  • Compact footprint for minimum space requirement
  • Textured surface finish for durability
  • Standard accessories: Wheel guard, 3 centring cones 48-128 mm dia., quick-clamping nut, clamping head with ring and protector, compression spring, rim width callipers, universal weight pliers, 3 storage pegs on the left-hand machine side, calibration weight
    • geodyna990

    Hofmann Geodyna 990-2

    2 YEAR PARTS WARRANTY

  • Motorised wheel balancer
  • Virtual plane measurement (VPM) technique*
  • Automatic input of distance rim/machine (2D SAPE)
  • Input of rim diameter and width by pressing of the function key and turning of the wheel*
  • Conspicuous LC display
  • Automatic pre-selection of weight locations with the easyALU mode
  • Gauge arm with wheel weight clamp* and adhesive weight positioning system
  • Hidden weight mode
  • PAX wheel mode
  • Automatic braking of the wheel after measurement
  • Pedal-operated main shaft lock
  • Measuring speed < 100 rpm, hence no wheel guard required
  • 4 User profiles
  • Rim width (Inch)1 - 20 Rim diameter (Inch)8 - 25

    • Buy from only £10.29 per week on a 5 year lease
    Detailed information - Click here

     

    geodyna4500

    Hofmann Geodyna 4500-2

     2 YEAR PARTS WARRANTY - FREE ALLOY CLAMPING HOOD WORTH £115.00

  • Virtual plane measurement (VPM) technique*
  • Automatic input of distance rim/machine and rim diameter (3D SAPE)
  • Input of rim width by pressing of the function key and turning of the wheel*
  • Conspicuous LC display
  • Automatic pre-selection of weight locations with the easyALU mode
  • Hidden weight mode
  • PAX wheel mode
  • Automatic braking of the wheel after measurement
  • Pedal-operated main shaft lock
  • Optimisation*
    Gauge arm with wheel weight clamp* and adhesive weight positioning system
  • 4 User profiles
  • Rim width (Inch)1 - 20 Rim diameter (Inch)8 - 25
    • Buy from only £14.80 per week on a 5 year lease
    Detailed information - Click here
    geodyna4900

    Hofmann Geodyna 4900-2

     2 YEAR PARTS WARRANTY

  • Virtual plane measurement (VPM) technique*
  • Automatic input of distance rim/machine, rim diameter and width (3D SAPE)
  • 17" TFT flat screen
  • Automatic pre-selection of weight locations with the easyALU mode
  • Hidden weight mode
  • PAX wheel mode
  • Automatic orientation of wheel into correction plane (12 h position)
  • Optimisation*
  • Gauge arm with weight clamp* and adhesive weight positioning system
  • 9 User profiles
  • asanetwork capability
  • Convenient on-line user guidance
  • Comprehensive on-line help in more than 20 languages

    • Buy from only £19.77 per week on a 5 year lease
    Also available with electro-mechanical power clamp device, please call for pricing.

    Detailed information - Click here

    geodyna6900p

    Hofmann Geodyna 6900-2P

     2 YEAR PARTS WARRANTY

  • Non-contact automatic acquisition of all wheel data
  • Automatic detection of number and position of alloy rim spokes
  • geodata gauge arm with patented wheel weight clamp for positioning adhesive wheel weights
  • Electro-mechanical power clamp device
  • Rim lighting system
  • Patented virtual plane measurement (VPM) technique
  • 17“ TFT flat screen
  • Patented optimisation mode
  • Ergonomic weight tray
  • Ergonomic shelves for cones and clamping means holders
  • Compatible with asanetwork
  • Rim width (Inch)3 - 20 Rim diameter (Inch)14 - 26

    • Clamp the wheel, close the wheel guard, and all wheel data is detected automatically in a single measuring run. The operator does not even have to touch the wheel - that's how easy and quick professional wheel balancing can be. Buy from only £32.04 per week on a 5 year lease 

    Detailed information - Click here

    geodyna980l

    Hofmann Geodyna 980L Truck wheel balancer

     2 YEAR PARTS WARRANTY

  • Automatic input of distance rim/machine and rim diameter (2D SAPE)
  • Input of rim width by pressing of the function key and turning of the wheel*
  • Electronic friction brake to retain the wheel in any position
  • Virtual plane measurement (VPM) technique*
  • Weight tray with 27 weight compartments and shelves for cones and weight pliers
  • Measuring speed less than 100 rpm, hence no wheel guard required
  • Automatic braking of the wheel after measurement
  • Automatic static and dynamic unbalance measurement in a single measuring run
  • Cone adaptor with spacer and light-truck cone of 120 - 170 mm diameter
  • Gauge arm with weight clamp* to enter wheel data and position adhesive weights
  • Hidden weight mode
  • Optimisation*

     

    • cheetah

    Bead blasting seating tool

    Air booster for those hard to seal tyres. Bead blasting seating tool. It seats the beads of difficult tubeless tyres instantly by directing a rush of air into the gap between the tyre and rim, lifting the bead to give a contact seal which allows the tyre to inflate. Easy to use on car, truck, bus, agricultural and ATV tyres.
    monty+1000

    Hofmann Monty 1000

    The perfect entry-level tyre changer for shops desiring to expand into wheel service and looking for value without compromising features.
    Specifications 

    Inner clamping range (Inch)12 - 22
    Outer clamping range (Inch)10 - 20
    Rim width (Inch)12
    Tyre width max. (Inch)13
    Wheel diameter max. (mm)1000
    Bead breaker range (mm)70 - 330
    Power supply230 / 400 V 3ph 50 Hz
    Dimensions - Width (mm)max. 1040 Dimensions - Depth (mm)875 Dimensions - Height (mm)max. 1170

    Hofmann Monty 1270-2

     2 YEAR PARTS WARRANTY

  • Double-acting bead breaker cylinder
  • Side swing arm for minimum space requirement
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim
  • Self-centring four-jaw chuck
  • Mounting tool with plastic protection
  • Ergonomic and user-friendly arrangement of pedals
  • Quick-inflating valve
  • Outer clamping range up to 20"
  • 1 phase electrics
  • Inner clamping range (Inch)12 - 22 Outer clamping range (Inch)10 - 20

    • Buy from only £9.02 per week on a 5 year lease

    Hofmann Monty 2300

     2 YEAR PARTS WARRANTY

  • Double-acting bead breaker cylinder
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim
  • Self-centring four-jaw turntable
  • Mounting tool with plastic protection
  • Ergonomic and user-friendly arrangement of pedals
  • Quick-inflating valve
  • Outer clamping range up to 20"
  • Pedal-controlled (mechanical) tilt back post, locked in working position; manually tilted forwards
  • 1 phase electrics
  • With optional easymont pro suited for handling run-flat tyre systems (additional optional adaptors required for PAX and CSR) Click magnifying glass for more info.
    • Buy from only £10.86 per week on a 5 year lease

    Hofmann Monty 3300

     2 YEAR PARTS WARRANTY

  • Double-acting bead breaker cylinder
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim
  • Pneumatically controlled movement of mounting head towards the rim
  • Self-centring four-jaw turntable
  • Mounting tool with plastic protection
  • Ergonomic and user-friendly arrangement of pedals
  • Quick-inflating valve
  • Outer clamping range up to 20"
  • Pedal-controlled tilt back post, pneumatically locked in working position and pneumatically tilted forwards / backwards
  • 1 phase electrics
    • monty3300racing

    Hofmann Monty 3300 Racing

     2 YEAR PARTS WARRANTY -FREE PLUS KIT WORTH £325.00

  • Double-acting bead breaker cylinder
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim (pneumatically controlled)
  • Self-centring four-jaw turntable
  • Mounting tool with plastic protection
  • Ergonomic and user-friendly arrangement of pedals
  • Quick-inflating valve
  • Outer clamping range up to 24"
  • Pneumatic tilt back post, pneumatically locked in working position and pneumatically tilted forwards / backwards
  • Pneumatic tool lock and pneumatic tool approach
  • Two turntable speeds (7 and 13 rpm)
  • Pedal controlled inflation
  • Tool box with integrated precision pressure gauge
  • Bead breaker blade supported in three joints
  • Bead breaker infinitely adjustable
  • 3 phase or 1 phase
    • Ideal for shops with high tyre service volume which handle UHP and run-flat tyres. Buy from only £20.92 per week on a 5 year lease
    monty_3300_racing_plus_wdk

    Hofmann Monty 3300 Racing Plus

     2 YEAR PARTS WARRANTY
  • Pneumatic mounting tool easymont pro and "plus" kit (standard equipment) for handling of UHP and run-flat tyre systems (additional optional adaptors required for PAX and CSR tyres)
  • Double-acting bead breaker cylinder
  • Mounting head vertically and laterally adjustable in spaced-apart position relative to the rim (pneumatically controlled)
  • Self-centring four-jaw turntable
  • Mounting tool with plastic protection
  • Ergonomic and user-friendly arrangement of pedals
  • Quick-inflating valve
  • Outer clamping range up to 24"
  • Pneumatic tilt back post, pneumatically locked in working position and pneumatically tilted forwards / backwards
  • Pneumatic tool lock and pneumatic tool approach
  • Two turntable speeds (7 and 13 rpm)
  • Pedal controlled inflation
  • Tool box with integrated precision pressure gauge
  • Bead breaker blade supported in three joints
  • Bead breaker infinitely adjustable
  • 3 phase
    • brakesbb

    Professional Brake Bleeder

    Takes the hassle out of bleeding brakes and clutches. Top build quality. The sturdy powder coated and welded steel case is retained and as before, the 4 litre fluid bottle is internal where it is protected against the garage environment.
    The method of operation is basically the same in that new fluid is stored moisture free within the unit and delivered to the vehicle being bled under pressure. This pressure is produced by a special, high capacity 12V electric pump, especially designed for pumping brake fluid in the required pressure range. A front panel control may be used to vary the bleed pressure for different vehicle types. Producing the bleed pressure in this way means that not only are the brakes bled first time every time, but complete fluid changes can be made within a matter of minutes, including setup. Fluid pumping capacity is so great that all bleed nipples may be opened and bled simultaneously.
  • Variable pressure delivery means that vehicles with specific requirements may be safely bled.
  • Uses a patented method to ensure that fluid within the storage bottle does not absord atmospheric moisture.
  • The small size and low weight make the unit supremely portable and versatile.
  • The high quality connectors used are self sealing even if disconnected under pressure.
  • Incorporates a storage space for tools, hoses, caps etc.
  • Supplied with a semi-universal reservoir cap which suits the majority of UK and European manufactured vehicles.
  • Standard bleed pressure is between 1 and 2 Bar (14 to 28psi) but the unit may be calibrated on request to 3 Bar for specific purposes.
  • Specific reservoir caps can be supplied to suit almost any vehicle. 
  • Please click here for more information

    • Hydraulic Coil Spring Compressor

    1000kg Foot operated hydraulic unit. Quicker and easier than using ratchet driven spring compressor. Plastic coated yokes reduce the risk of spring slippage or damage and are suitable for springs from Ø102mm to Ø160mm

    Maximum Load: 1000kg
    Upper Yoke Positions: 7
    Lower Yoke Travel: 340mm
    Spring Diameter: 102-160mm
    Actuation: Foot Pedal

    Compac Coil Spring Compressor

    Universal swivel jaws that fit all springs. Only the spring holder needs to be replaced. Strong and reliable air pump suitable for most cars, vans, 4WD, SUV etc. Long stroke of 330mm. Air consumption 225 litre per min. Comes with 2 spring holders 78-125mm and 125-200mm. This unit is mounted with 2 wheels enabling it to be easily stored when not in use. Enough power to compress strong springs like Ducato, Jumper, Boxer etc. Fitted with safety guard and best of all a 3 YEAR WARRANTY

    tyredig

    MOT Approved Digital Tyre Depth Gauge

    Calibrated and VOSA approved for use when MOT testing all classes of vehicle. Hardened and tempered stainless steel gauge. Metric and Imperial calibration with conversion between the two. Zero reset control allows for comparative measurement. Hold feature prevents reading being accidentally altered. Includes flat surface plate for accurate zeroing of gauge prior to use. Supplied in carry-case.
    Range: 0-10mm/0-0.4” - Resolution: 0.01mm/0.0005” - Accuracy: ±0.01mm/0.0005” - Battery: SR44 - 1.5V

    Brake Fluid Changer kit

    Complete kit to collect old brake fluid & replace with new.
    - Bleeding tube & shut off valves connects to the 2.7 litre container, prime the handle & watch it work.
    - Includes refill pot that fits onto the brake fluid reservoir. When the level is reached it stops replenishing, continues when the liquid drops again. Prevents brake fluid overflow, (prevents air in system).