Lift Nuts - Vehicle lifts

Tel: 024 76491973 or email info@garageequipmentdirect.co.uk

All nuts are priced each unless specified.

If you don't see the item you require, please contact us as this is only a tiny selection of operating nuts

We can install your operating nuts, if within 1 hour of Coventry starting at £125.00. Phone for quotation

Bradbury 2103 Op nut

Buy Now
Operating Nut for Bradbury 2103 two post vehicle lift.

Bradbury 2103 Safety nut

Buy Now
Safety Nut for Bradbury 2103 two post vehicle lift. Older lifts had narrow safety nut which is half the length of the op nut, this nut which is same length should be fitted per manufacturers bulletin.

Bradbury 2701 / 2703 op nut

Buy Now
Operating nuts to suit Bradbury models 2701 and 2703.

Bradbury 2903 operating nuts

Buy Now
Main operating nuts in brass to suit Bradbury 2903 lift, note that these are handed (Power post and Slave post)

Bradbury 2903 safety Nut

Buy Now
2903saf
Bradbury 2903 vehicle lift safety nuts

Bradbury 888 op nuts & Safety nuts

Buy Now

Supplied with op nuts and safety nuts. Price is per side. Both operating and safety nuts are supplied to set up correct tolerance.

Cascos C3.2 Op nut

Buy Now
Main operating nut to suit Cascos C3.2 vehicle lift

Consul Mk 2 Operating nut

Buy Now
Operating nut to suit Consul 2 post lift Mk 2, identified with circlip around top of operating nut. TWO NUTS PER LIFT REQUIRED

Hofmann Europa Op nut

Buy Now
Operating nut to suit Hofmann Europa 2 post lift, please check if length is 80mm or 120mm. Models 301, 255, 2/3 TWO NUTS PER LIFT REQUIRED

Hofmann Duo Lift ST28 Op nuts

Buy Now
hofduo
Operating nuts to suit Hofmann Duo lift - ST28 - TWO NUTS PER LIFT REQUIRED

Istobal Main Nut

Buy Now
Mod No 42712

Laycock 148155 op nut

Buy Now
Operating nut to suit Laycock 2 post vehicle lift Model No 148155

Laycock Coronation lift Operating Nuts

Buy Now
Op nuts to suit Laycock Coronation, Coro 1 and Coro 2 Vehicle lifts. Coro 2 op nut is flat bottomed with no boss protruding through the trip plate, also identified that under the electric motor there is a drive belt running from motor to large 12 inch dia cog rather than the chain running directly around sprocket on the motor. Please select.

Picture shows op nut to suit Coronation and Coro 1, coro 2 does not have the boss on the underside

Laycock / Tecalemit Operating nut for 8 ton and 14 ton lifts

Buy Now
Op nut to suit Laycock - Tecalemit 8 ton or 14 ton commercial four and six post vehicle lifts

OMCN 2 post lift nut

Buy Now
Operating nut to suit OMCN TWO post lifts. TWO NUTS PER LIFT REQUIRED

OMCN 1 post lift

Buy Now
Operating nut to suit OMCN SINGLE post lift

Ravaglioli KP307 op nut

Buy Now
Ravaglioli KP 307 operating nut

Stenhoj operating nut

Buy Now
stennut
Operating nut to suit Stenhoj mascot lifts Models 624, 614. Nylon 5mm pitch origional looks like a gear on the larger diameter. TWO NUTS PER LIFT REQUIRED

Souriou Op Nuts

Buy Now
souopnut
Op nuts to suit Souroiu 2 post lifts Nylon Type. TWO NUTS PER LIFT REQUIRED

Tecalemit Twintec Mk 5 - SF8768 Op Nut

Buy Now
Operating nuts to suit Tecalemit two post lift Model No SF8768 manufactured in brass. TWO NUTS PER LIFT REQUIRED. IMPORTANT that you provide serial number in the space provided as there are two types of nut. 

Tecalemit Twintec Mk 5 Safety nuts (Steel)

Buy Now
SF8768 lift safety nuts

Tecalemit SF8907 Op nut

Buy Now
Operating nut to suit Tecalemit SF8907 two post lift, please measure main screw which will be either 40mm diameter OR 45mm diameter. Price is each, TWO NUTS PER LIFT REQUIRED

Tecalemit 9010

Buy Now
Operating nut to suit Tecalemit 9010. Please specify length 80mm or 120mm approx

Tecalemit Mk 6 SF8837- brass

Buy Now
Operating nut to suit Tecalemit SF8837 two post lift

Tecalemit 4449250

Buy Now
Operating nut to suit Tecalemit 4449250 A, B or C, please specify correct letter after model number.

Werther 225, 255

Buy Now
Werther Models 225 and 255, Europa 3. Two post lifts

Werther 253 op nut

Buy Now
Operating nuts to suit Werther 253 two post lift, please note that these are handed

Werther 301 operating nut

Buy Now
Operating nut to suit Werther 301 2 post lift, pleaser check if length is 80mm or 120mm TWO NUTS PER LIFT REQUIRED