BendPak XP-12FD, 5.4 tonne two post lift. Floorplate

 

Probably the most robust 5.4 tonne 2 post vehicle lift that you can buy. For the garage that repairs vans and light to mid size commercials you will find this lift hard to beat.

FEATURES:

XP-SERIES – EXTRA POWER / EXTREME PERFORMANCE
This open-top two-post lift is a rugged 5.5 tonne capacity floor plate lift that features a “Dual-Synchro” equalization system and user-friendly controls. These advanced, state-of-the-art models feature dual, direct-drive low-pressure cylinders that minimize leakage and reduce the workload placed on the entire hydraulic system, an exclusive BendPak design feature saving you maintenance costs throughout the life of the lift. Sixteen individual maintenance-free UHMW load bearings, single-piece columns, extra-tall lifting carriages and oversize 5” cable sheaves are an exclusive feature found only on BendPak XP-Series lifts. This boosts performance still further and vastly increases the life expectancy of the lift, a lift most likely to be the last one you’ll ever have to purchase. Power column can be located on either side

  • Carriage slider blocks are made from a space age ultra-high molecular weight UHMW polyethylene which is virtually maintenance free and self lubricating.
  • Safety position are located in each column 
  • Automatic locks located in each post for added safety.
  • The hydraulic pump incorporates a fully regulated pressure relief system to prevent overload.
  • A meter flow control valve is built into each hydraulic cylinder to safely control lowering speed in case of hose rupture.
  • Electric-hydraulic power  is equipped with an American made Industrial grade motor.
  • All necessary installation hardware is included.
  • Truck and van adapters come FREE!!!
  • High-Gloss industrial epoxy specially formulated for offshore oil platforms is used on every Excel lift to provide superior resistance against corrosion and offers the ultimate protection from the elements.
Model XP-12FD
Lifting Capacity  5443 Kg. / 12,000 Lbs. 
Overall Height 144" / 3403 mm
Overall Width (Outside of Base Plate 155" / 3937 mm
Width (Outside of Columns) 146" / 3708 mm
Inside Columns 118" / 2997 mm
Reach (Front Arm Min.) 39" / 991 mm
Reach (Front Arm Max) 59" / 1499 mm
Reach (Rear Arm Min.) 39" / 991 mm
Reach (Rear Arm Max) 59" / 1499 mm
Min. Pad Height 5" / 127 mm
Rise 69" / 1753 mm
Max Lift Height (Pad Only) 74" / 1880 mm
Max Lift Height (6" Adapter) 80" / 2032 mm
Drive-Thru Clearance 103" / 2616 mm
Max Load Per Arm 3,000 Lbs. / 1134 Kg.
 
 
Purchase from our shop at www.garageequipmentdirect.co.uk or

Phone: 024 76491973 (UK Only)