Laycock & Kismet Lift Spares

Pulley pin to suit above pulleys

genid_441482592
Add to cart
These are fitted to the platform pulleys which sit horizontal and are approx 5" length

Laycock / Tecalemit Pulley Spacer

Add to cart
hsspacer
Spacer for pulleys on all High speed vehicle lifts, these are fitted on main posts and also on horizontal platform pulleys.

Laycock / Tecalemit Safety arm cable roller

114691
Add to cart
Safety arm roller for Laycock or Tecalemit high speed vehicle lift, fitted where cable runs up inside post after passing around the pulley and anchoring at top of post. Suits all, including model No 151111, 151112, 123784, 122478, 123795, 121464, 123794, 150981, 150982 (Price is each)

Safe Working Load Labels

Add to cart
Stickers for SWL load identification for current Health and Safety markings on vehicle lifts

Laycock Coronation lift Operating Nuts

Add to cart

Op nuts to suit Laycock Coronation, Coro 1 and Coro 2 Vehicle lifts. Coro 2 op nut is flat bottomed with no boss protruding through the trip plate, also identified that under the electric motor there is a drive belt running from motor to large 12 inch dia cog rather than the chain running directly around sprocket on the motor. Please select.

Picture shows op nut to suit Coronation and Coro 1

Laycock / Tecalemit Operating nut for 8 ton and 14 ton lifts

11462
Add to cart
Op nut to suit Laycock - Tecalemit 8 ton or 14 ton commercial four and six post vehicle lifts

Laycock / Tecalemit Main screw for 8 ton and 14 ton lifts

12351
Add to cart
 
Main screw for Laycock / Tecalemit 8 tonne or 14 tonne four or six post commercial vehicle lifts, Nut shown above

Collets for 8 and 14 ton Laycock / Tecalemit lifts

12440
Add to cart
Collets to suit Laycock 8 and 14 tonne commercial vehicle lifts, supplies as a pair

Laycock / Tecalemit Safety arm spring for High Speed lift

122126
Add to cart
Safety Arm spring for Laycock/Tecalemit High speed lift  (2 1/4" length). Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit Ram guide roller

149893
Add to cart
rollerhs
Ram end plate guide roller (21mm wide by 21mm length). Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit Main Ram feed hose

121917-2
Add to cart
Ram feed hose for Laycock/Tecalemit High Speed lift comes from Control box on power post down to front of platform. Suits all, including model No 151111, 151112, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit High Speed lift contactor

LC1 D090 415v
Add to cart
Contactor for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase

Laycock / Tecalemit Safety switch

147933
Add to cart
Safety micro switch for Laycock/Tecalemit 8 and 14 ton vehicle lifts.

Laycock / Tecalemit Post guide roller

126787
Add to cart
Post guide roller for Laycock/Tecalemit High Speed lift (Fits onto stabalizer bracket) shown on bracket - not included. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit High speed lift seal kit

149834
Add to cart
High Speed Lift - for model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

Laycock / Tecalemit Safety valve REPAIR KIT

138467
Add to cart
hssafvalve
For all Laycock / Tecalemit High Speed vehicle lifts, situated on main ram on underside of platforms. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982 (Repair kit Not valve)

Laycock / Tecalemit Relief Valve

HS relief valve
Add to cart

Laycock - Tecalemit High speed lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982

Cover Plate to suit Laycock / Tecalemit lifts

Add to cart
Motor housing chain bottom coverplate for Laycock 8 ton and 14 ton vehicle lifts. Front and rear shown on picture.

Laycock / Tecalemit control valve (top)

127866
Add to cart
High Speed lift top section of control valve, no need to purchase complete valve if cam assembly breaks. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

Control valve service kit

SP152362
Add to cart
Tecalemit / Laycock high speed lift control valve service kit Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982

Post cover

Add to cart
postcover
Top post cover for all Tecalemit and Laycock High speed lifts Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982

Parking device for High Speed lift

Add to cart
tecpark
Parking device for Tecalemit or Laycock High Speed lift - Use when the lift is in fully raised position and drop into the platform to stop lift creeping down.

Toe guard bracket

Add to cart
Has your insurance inspector picked you up for no toe guards. For a cheap solution just bolt or weld our brackets about every 18" and use conduit for the rail.

Laycock/Tecalemit HS overload

Add to cart
Overload for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase (Fits to item above)

Kismet - Laycock Drive coupling Element

2000 elem
Add to cart
Drive coupling element for Laycock or Kismet 1700 two post lifts and 2000 four post lifts